Peugeot 607 Front Bumper Removal • Certified & Working

Before you start removing the front bumper, make sure the car is parked on a level surface and apply the parking brake. Turn off the engine and engage the ignition switch to the “off” position.

The front bumper is usually held in place by a series of bumper mounts that are attached to the car’s body. Use a socket wrench or ratchet and socket to remove the screws that hold the bumper mounts in place, and then gently pull the mounts away from the car. peugeot 607 front bumper removal

To access the screws and clips that hold the front bumper in place, you’ll need to remove the grille and trim pieces. Use a Phillips screwdriver to remove the screws that hold the grille in place, and then gently pull the grille away from the car. You may need to use a plastic trim removal tool to remove the clips that hold the trim pieces in place. Before you start removing the front bumper, make

With the wheels removed, you should be able to see the screws and clips that hold the front bumper in place. Use a socket wrench or ratchet and socket to remove the screws. There are usually several screws located along the bottom edge of the bumper, as well as a few clips that hold the bumper to the car’s body. Use a socket wrench or ratchet and socket

To reinstall the front bumper, simply reverse the steps above. Start by reattaching the bumper mounts, and then reconnect the electrical connectors. Place the front bumper back in place, and use the screws and clips to secure it.